16 Wood Dapping Punches, Block & Hammer for Metalsmiths, Metal Working & Shaping, Forming & Chasing Metal12 Wood Dapping Punches. This is a set of 12 wood dapping punches. Used for shaping, forming and chasing metal in dapping blocks. Will not mar metal while shaping and forming. These punches measure approximately 13, 15, 16, 18, 20, 21, 23, 24.5, 26, 28, 30 and 32 mm (0.51", 0.59", 0.62", 0.7", 0.78", 0.82", 0.9", 0.96", 1.02", 1.1", 1.18" and 1.25") Wood Dapping Block W/2 Punches. This is a new wood dapping block with 2 punches. Great for shaping metals and removing dents. Wood will not scratch or mar precious metals. The block measures approximately 2 1/4" x 2 1/4" x 2 1/4" (57 x 57 x 57 mm). The depressions measure approximately 29, 29, 35, 36, 43 and 44 mm (1.14", 1.14", 1.37", 1.69" and 1.73")Wood Hammer. This is a new wood hammer. Made of the finest quality boxwood, which is one of the hardest woods available. Mounted on seasoned wood handle. This is excellent for removing dents and straightening and flattening metals. The head diameter measures approximately 3 1/4" x 13/16" (82.5 x 20.5 mm) long. The hammer measures approximately 9" (228.5 mm) long We work hard to update our descriptions and pictures of our merchandise. As part of a process of ongoing innovation by our suppliers, newer versions of the item shown may be shipped before we are able to complete an update. As a result there may be a slight variation in color and design. |