32 Dapping Punches, Blocks & Hammers for Metalsmiths, Metal Working & Shaping, Forming & Chasing Metal12 Steel Dapping Punches. This is a new set of 12 steel dapping punches. Used for shaping, forming and chasing metal in dapping blocks. These punches measure approximately 4, 4.52, 4.97, 5.53, 5.99, 6.47, 6.95, 7.52, 8.01, 8.53, 9.45 and 11 mm (0.15", 0.17", 0.19", 0.21", 0.23", 0.25", 0.27", 0.29", 0.31", 0.33", 0.37" and 0.43") Steel Dapping Block. This is a new steel dapping block. The depressions have a smooth finish that are great for shaping metal. Made from high carbon tool steel that is grinded, hardened and tempered. Has 17 half spheres that measure approximately 5, 6, 8, 8.5, 9.5, 9.8, 10.5, 11, 16.5, 17, 17.5, 18.75, 24, 26.5, 31.5, 37 and 43.5 mm (0.19", 0.23", 0.31", 0.33", 0.37", 0.38", 0.41", 0.43", 0.65", 0.67", 0.68", 0.73", 0.94", 1.04", 1.24", 1.45" and 1.71"). The block measures approximately 2 1/2" x 2 1/2" x 2 1/2" (63.5 x 63.5 x 63.5 mm)Brass Dapping Block. This is a new brass dapping block. The depressions have a smooth finish that are great for shaping metal. The half spheres are precision machined and hardened to perfection. Has various sized depressions that measure up to approximately 31.75 mm (1.25"). The block measures approximately 1 1/2" x 1 1/2" x 1 1/2" (38 x 38 x 38 mm)Chasing Hammer. This is a new chasing hammer. Has a large face for striking chasing tools or flattening. The pein side is for riveting and metal design. The forged head is wedge-mounted on a hardwood handle. The flat end measures approximately 1" (25 mm) in diameter. It measures approximately 10" (254 mm) long Horn Anvil. This is a new horn anvil. Made of cast steel. Great for a variety of uses because due to the weight and shape. Excellent for a jewelry repair bench for shaping metal. It measures approximately 5" x 1.5" x 2 5/8" (127 x 38 x 66.5 mm) longWe work hard to update our descriptions and pictures of our merchandise.