38 Dapping Punches, Blocks & Hammers for Metalsmiths, Metal Working & Shaping, Forming & Chasing Metal36 Steel Dapping Punches Great for Metalsmiths & Metal Working. This is a new set of 36 steel dapping punches. Used for shaping, forming and chasing metal in dapping blocks. Made from tool steel and hardened to 50 Rc on both hit and work ends. Their unique tempering method leaves the shank of the punch with a mill hardness of 32 Rc to 36 Rc. This allows the handle to absorb the shock and prevent crystallization of the metal, which enhances the performance and life of the tool. Comes with wood stand. These punches measure from approximately 2 to 25.2 mm (0.07" to 0.99") Dapping Block. This is a new steel dapping block. The depressions have a smooth finish that are great for shaping metal. Made from high carbon tool steel. It is precision machined and hardened to perfection to meet rigorous standards. Has a Rockwell hardness 45 Rc. The other side is also fully ground and can be used as a bench block anvil. Has 27 half spheres that measure approximately 2, 2.5, 3, 3.5, 3.8, 4.5, 4.8, 6, 6.8, 8, 8.6, 9.6, 11, 12, 13, 13.5, 14.5, 15.7, 16.8, 18, 18.5, 20, 20.7, 21.7, 22.7, 23.5 and 24.7 mm (0.07", 0.09", 0.11", 0.13", 0.14", 0.17", 0.18", 0.23", 0.26", 0.31", 0.33", 0.37", 0.43", 0.47", 0.51", 0.53", 0.57", 0.61", 0.66", 0.7", 0.72", 0.78", 0.81", 0.85", 0.89", 0.92" and 0.97"). The block measures approximately 5" x 2 1/2" x 15/16" (127 x 62.5 x 23.5 mm)Chasing Hammer. This is a new chasing hammer. Has a large face for striking chasing tools or flattening. The pein side is for riveting and metal design. The forged head is wedge-mounted on a hardwood handle. The flat end measures approximately 1" (25 mm) in diameter. It measures approximately 10" (254 mm) long.