37 High Speed Twist Drill Bits & Pin Vises for Metalsmiths, Metal Working, Drilling & Holding Drill Bits7 Pin VisesThis is a new set of 7 pin vises. These can be used as a hand drill with small twist drills. This can also be used as a screwdriver with small screwdriver blades. Hold burs, files, reamers, wire and stock or tubing for filing.You receive: One brass pin vise that has a thick black nut, has a capacity of approximately 0.039" (1 mm) and measures about 3" (76 mm) long. One brass pin vise that has a capacity of approximately 0.028" (0.71 mm) and measures about 3 7/8" (98.5 mm) long. One nickelled swivel pin vise that comes with two double ended collets, has a capacity of approximately 0.125" (3.2 mm) and measures about 3 1/2" (89 mm) long. One nickelled sliding pin vise that has a capacity of approximately 0.032" (0.08 mm) and measures about 4 1/4" (108 mm) long. One plastic graver pin vise that has a capacity of approximately 0.118" (3 mm) and measures about 2 3/4" (70 mm) long. One nickelled sliding pin vise that has a capacity of approximately 0.05" (1.3 mm) and measures about 4 1/8" (105 mm) long. One oxidized black tool steel pin vise that has a capacity of approximately 0.032" (0.8 mm) and measures about 3 1/2" (89 mm) long30 High Speed Twist Drill Bits. The is a new set of 30 high speed steel twist drill bits. Great for drilling ferrous metals, tough casting sand forgings, working hardened stainless steel and other hard steels and tough high tensile strength nonferrous metals like titanium.