24 Watchmakers Screwdrivers Sharpener Movement Holders 8 Slotted Screwdrivers. This is a new set of 8 slotted screwdrivers. Great for watch, clock and computer repair. The screwdrivers and stand are color coded so you always know what slot to put them in. The stand rotates and has the sizes of each screwdriver tip. It also has 8 holes in the center for extra blades. You receive: One slotted screwdriver with a 0.64 mm tip that measures approximately 2 13/16" (71 mm). One slotted screwdriver with a 0.85 mm tip that measures approximately 2 7/8" (73 mm). One slotted screwdriver with a 1.13 mm tip that measures approximately 3 1/16" (78 mm). One slotted screwdriver with a 1.25 mm tip that measures approximately 3 1/8" (79 mm). One slotted screwdriver with a 1.64 mm tip that measures approximately 3 1/4" (82.55 mm). One slotted screwdriver with a 2.10 mm tip that measures approximately 3 7/16" (87 mm). One slotted screwdriver with a 2.57 mm tip that measures approximately 3 1/2" (88.9 mm). One Phillips screwdriver that measures approximately 3 1/2" (88.9 mm). One rotating screwdriver stand that measures approximately 2 5/8"(64.8mm) in diameter and 1 7/8"(48.4mm) tall. Screwdriver Sharpener. This is a new screwdriver sharpener. The spring action holds the screwdriver firmly in place. Holds screwdrivers up to 3/16" (5.6 mm) in diameter. Steel wheels are carefully set into the body to provide even action when wheeled over stone. It measures approximately 1 7/8" (47 mm). Combination Sharpening Stone. This is a new combination sharpening stone #149. It is a hard, sharp, tough stone. Long recognized for the clean, sharp surfaces it produces on tools, dies, blades, molds and almost any other metal piece requiring sharpening or smoothing. It measures approximately 3" (76 mm) long 12 Plastic Watch Movement Holders. This is a new set of 12 plastic watch movement holders. Great for watch repair and holding round movements. Watch Movement Holder.