18 Steel Dapping Punches & Blocks for Metalsmiths, Metal Working & Shaping, Forming & Chasing MetalSteel Dapping Block. This is a new steel dapping block. The depressions have a smooth finish that are great for shaping metal. The half spheres and half cylinders are precision machined and hardened to perfection. Has 9 half spheres on one side and 5 on the other side that measure approximately 3.90, 4.75, 5.88, 6.57, 7.50, 9.30, 11.40, 13.45, 15.65, 16.60, 18.50, 19.50, 21.50, and 24.60 mm (0.15", 0.18", 0.23", 0.25", 0.29", 0.36", 0.44", 0.52", 0.61", 0.65", 0.72", 0.76", 0.84", and 0.96"). Has 8 half cylinders that measure approximately 5.00, 6.30, 8.00, 12.70, 15.90, 19.25, 22.60, and 24.75 mm (0.19", 0.24", 0.31", 0.49", 0.62", 0.75", 0.88", and 0.97"). The block measures approximately 4 1/16" x 2 1/2" x 15/16" (103.6 x 63.5 x 24 mm)12 Steel Dapping Punches Great for Metalsmiths & Metal Working. This is a new set of 12 steel dapping punches. Used for shaping, forming and chasing metal in dapping blocks. These punches measure approximately 4.09, 4.65, 4.98, 5.5, 5.95, 6.32, 7.05, 7.52, 8.04, 8.45, 9.89 and 10.92 mm (0.16", 0.18", 0.19", 0.21", 0.23", 0.24", 0.27", 0.29", 0.31", 0.33", 0.38" and 0.42") Bench Block Great For Metalsmiths & Metal Working. This is a new bench block. Made with steel that has been hardened to a full 0.40 case, then carefully drawn for stress relief. When using this block for flattening or chasing, you'll notice how finely polished it is. It measures approximately 2.5" x 2.5" x 1/2" (63.5 x 63.5 x 13 mm) Ball Pein Hammer. This is a new 1/2 lb ball pein hammer. Has a hardwood handle. The flat end measures approximately 15/16" in diameter. It measures approximately 11" (279.5")We work hard to update our descriptions and pictures of our merchandise. As part of a process of ongoing innovation by our suppliers, newer versions of the item shown may be shipped before we are able to complete an update.