24 Dapping Punches, Blocks & Hammers for Metalsmiths, Metal Working & Shaping, Forming & Chasing Metal 18 Steel Dapping Punches. This is a new set of 18 steel dapping punches. Used for shaping, forming and chasing metal in dapping blocks. These are chrome tempered steel and are made of the finest metals that are case hardened. These punches measure approximately 3.52, 4.18, 4.57, 5.06, 5.6, 6, 6.53, 7.05, 7.43, 7.9, 9, 10.12, 10.88, 12, 13.04, 14, 14.93 and 16 mm (0.13", 0.16", 0.17", 0.19", 0.22", 0.23", 0.25", 0.27", 0.29", 0.31", 0.35", 0.39", 0.42", 0.47", 0.51", 0.55", 0.58" and 0.62") 4 In 1 Forming Block. This is a new 4 in 1 forming block. The depressions have a smooth finish that are great for shaping metal. Made from high carbon tool steel that is precision machined and hardened to perfection. Has 17 half spheres that measure approximately 2, 3, 3.5, 4, 4.5, 5, 5.5, 6, 7.5, 8, 8.5, 9, 11, 11.5, 13, 17, and 20 mm (0.07", 0.11", 0.13", 0.15", 0.17", 0.19", 0.21", 0.23", 0.29", 0.31", 0.33", 0.35", 0.43", 0.45", 0.51", 0.66" and 0.78"). Has 20 half cylinders that measure from approximately 2 to 24 mm (0.07" to 0.94"). Has 5 ovals that measure approximately 12.5 x 19.5, 14.5 x 19, 15 x 22, 20 x 27 and 18 x 26.5 mm (0.49" x 0.76", 0.57" x 0.74", 0.59 x 0.86", 0.78" x 1.06" and 0.7" x 1.04"). Has 3 v-shapes that measure from approximately 1.5 to 3 mm (0.05" to 0.11"). The block measures approximately 8" (203 mm) long Wood Dapping Block W/2 Punches. This is a new wood dapping block with 2 punches. Great for shaping metals and removing dents. Wood will not scratch or mar precious metals. The block measures approximately 2 1/4" x 2 1/4" x 2 1/4" (57 x 57 x 57 mm). The depressions measure approximately 29, 29, 35, 36, 43 and 44 mm (1.14, 1.14, 1.37", 1.69" and 1.73") Wood Hammer. This is a new wood hammer. Made of the finest quality boxwood, which is one of the hardest woods available. Mounted on seasoned wood handle.