151 New Jewelers Tools For Making Wire And Repairing Jewelry. Adjustable Flat Ingot Mold. This is a new adjustable flat ingot mold. This ingot mold is used to convert scrap into suitable shape for rolling. The metal is melted in a crucible and poured into the mold. This mold can be made smaller by adjusting the sides in a horizontal direction. A c-clamp holds the sides of the mold in place, then easily releases them. The mold measures approximately 70 x 45 x 4.5 mm (2 3/4" x 1 3/4" x 3/16"). It holds approximately 150 dwt (233 grams) of metal 3 Draw Plates. This is a set of 3 jeweler's draw plates. With these drawplates you can reduce and shape thickness of gold, silver, platinum, brass, copper or soft steel wire. The holes are progressively smaller, in proper increments, so that wire drawn from a preceding hole will go through the next hole easily. Occasional annealing will keep wire soft, and bee's wax can be used as a lubricant. These are of economical quality, which offers great versatility. You receive : One 25 half round hole that measures approximately 6" (152.4 mm) long drawplate with hole sizes 5 x 2 mm to 3 x 1 mm. One 71 round hole that measures approximately 6 1/2" (165.1 mm) long drawplate with hole sizes 2.5 mm to 0.12 mm. One 20 square hole that measures approximately 6" (152.4 mm) long drawplate with hole sizes 3.3 mm to 1.7 mm. Draw Tongs. This is a new pair of draw tongs with serrated jaws that provide an excellent grip when drawing wire. The properly shaped handles insure a good continuous hold. It measures approximately 10 1/4" (260.3 mm) long with jaws that measure about 1 5/8" x 3/4" (47 x 19 mm). Melting Dish Holder with Handle & Melting Dish. This is a new melting dish holder. This melting dish with removable handle makes it easy to melt and pour metals. The wooden resists heat, making for more comfortable work. The fused silica dish with clay bond is suitable for melting metals with high melting points, including platinum.