151 New Jewelers Tools For Making Wire And Repairing Jewelry. 3 Draw Plates. This is a new set of 3 jeweler's draw plates. With these drawplates you can reduce and shape thickness of gold, silver, platinum, brass, copper or soft steel wire. The holes are progressively smaller, in proper increments, so that wire drawn from a preceding hole will go through the next hole easily. Occasional annealing will keep wire soft, and bee's wax can be used as a lubricant. You receive : One 25 half round hole 6" (152.4 mm) long drawplate with hole sizes 5 x 2 mm to 3 x 1 mm. One 71 round hole 6 1/2" (165.1 mm) long drawplate with hole sizes 2.5 mm to 0.12 mm. One 30 square hole 6" (152.4 mm) long drawplate with hole sizes 2.5 mm to 1.5 mm. Draw Tongs. This is a new pair of draw tongs with serrated jaws that provide an excellent grip when drawing wire. The properly shaped handles insure a good continuous hold. It measures approximately 10 1/4" (260.3 mm) long with jaws that measure about 1 5/8" x 3/4" (41 x 19 mm). Melting Dish Holder with Handle & Melting Dish. This is a new melting dish holder with dish. This melting dish with removable handle makes it easy to melt and pour metals. The wood resists heat, making for more comfortable work. The fused silica dish with clay bond is suitable for melting metals with high melting points, including platinum. The overall length measures approximately 15" (26.67 cm), while the dish is approximately 2 7/8" (73 mm) in diameter and 1 5/16" (33 mm) tall Double Sided MoldThis is a new double sided ingot mold. This steel mold is used to convert scrap into suitable shape for rolling sheet or drawing wire. The metal is melted in a crucible and poured into the mold. This double sided mold features two narrow lines and one wide line. Measurements (approximate). Wide Line: 6.5" x 3/4" x 5/16" (165 x 19 x 7.9 mm). Narrow Lines (each): 6.5" x 5/16" x 3/8" (165 x 7.9 x 9.5 mm). Handle: 3" (76 mm). Overall: 11" x 1 3/16" x 1" (280 x 30 x 25 mm).