143 Watch Repair Tools. This is a new set of 143 watch repair tools. You receive: One 3X loupe that has a focal distance of 3" (76 mm). One pair of watch battery removal tweezers that measure approximately 4 7/8" (124 mm) long 3 Rotary screwdrivers with replaceable tips that measure 0.95, 1.12 and 2.11 mm. One watch pin pushing awl that measures approximately 5 1/8" (130 mm) long. One watch crystal protection base that measures approximately 2" (51 mm) in diameter. One jar of Anchor silicon grease for watches. One retractable fiber glass scratch brush for putting a satin finish on Rolex watches, cleaning battery terminals and measures approximately 4 1/8" (104 mm). One watch hand puller/remover that measures approximately 3 7/8" (98 mm) long. One spring bar remover with a spring bar measuring ruler and it measures approximately 6" (152 mm) long. One double ended watch hand press that measures approximately 3 3/4" (95 mm) long. One double ended pin vise with 2 chucks that measure approximately 4" (101 mm) long 2 Link pin removers with 8 attachments. One watch band holder that measures approximately 2 7/8" x 2 7/8" (37 x 37 mm). One ball pein hammer with a head that measures approximately 2 3/8" (60 mm) long and a face that measures approximately 9/16" (14 mm) in diameter. One spring bar remover that measures approximately 6" ( 152 mm) long. One water proof watch case wrench with 12 tip sizes, fits all pressure sealed watches and measures approximately 5 3/4" x 2" (146 x 50 mm). One Selvyt lint free crystal cloth that measures approximately 12" x 12" (30 x 30 cm). One leather polishing stick that measures approximately 9" (229 mm) long. One pair of specialty band pin pulling pliers that measures approximately 4 3/4" (121 mm) long. One pair of anti magnetic and anti acid stainless steel tweezers size AA SA that measure approximately 5" (127 mm) long. One pair of anti acid stainless steel tweezers size 5 SA that measure approximately 4 1/2" (114 mm) long.